Technical Specifications The technical documents here are available for use. Feel free to download, edit, and use them to specify glulam, solid sawn timber, decking, and TimberDeck on your next project.
Tongue & Groove Porch Decking Tongue & Groove Porch Decking is for use beneath covered porches & covered patios only. Installing tongue and groove on a deck without a roof covering the deck surface will cause complications such as allowing excessive water to collect and cause the material to cup, swell, and buckle.
Laminated roof decking is made from two to five pieces of lumber. This lumber is bonded together with a strong adhesive that is waterproof to form a strong laminated decking. Just like its cousin, solid roof decking, it is used for many applications including; homes, churches, mezzanines, balconies, and floors.
The best tongue and groove decking available anywhere in the midwest! We’re not prone to bragging, but this tongue and groove decking is far above standard and will look great on any home or cabin. The tongue is cut to fit snugly into the groove of the adjacent board providing a strong and attractive surface .
The sheathing for the roof was originally tongue-and-groove planking (it's a 1950's brick ranch with a typical sloping roof, in NC). The contractors want to replase this sheathing with plywood (1/2" CDX) because the tongue-and-groove planking is "expensive" and "hard to get".
(12 pages, 2.3 MB PDF) February 2004. Timber tongue and groove decking is a specialty lumber product, constituting an important part of modern timber construction, that can be used for many applications to provide an all-wood appearance.
The 2 in. x 6 in. x 12 The 2 in. x 6 in. x 12 ft. Pressure-Treated Decking Board is designed for aboveground use. The lumber can be painted or stained. The lumber can be painted or stained. It has a lifetime limited warranty against rot decay and termites.
Introduction. Western Red Cedar Tongue & Groove is widely used for its good looks and versatility. It can be installed horizontally, vertically or diagonally, each method giving a distinctly different look.
SWS decking is manufactured using kiln-dried (15% maximum moisture content) 2 x 6 nominal Southern Pine Lumber. It is machined with a single tongue-and-groove, a
Tongue and Groove decking, commonly referred to as T&G decking or T&G porch flooring, works great for covered porches and 3 season rooms. Tongue and groove porch flooring is another beautiful screw-free decking material option for areas that are fully covered by a roof.
AMERICAN WOOD COUNCIL. 4 TONGUE AND GROOVE ROOF DECKING. Two-Span Continuous. All pieces are supported on three supports. All end joints occur in line on every other support (Figure 6).
It's time to discuss roof sheathing. I have a question or two I think you gentlemen can answer. Last night, after work, I went to and Lowe's looking for 3/4" exterior rated tongue and groove roof sheathing.
Western Red Cedar tongue and groove is widely used for its good looks and versatility. It can be installed horizontally, vertically or diagonally, each method... [ Contact US ]
now manufactures solid sawn roof decking in. do not take into consideration slight section loss due to tongue and groove profile, beveled edges, and other.
Structural tongue and groove wood decking is the perfect complement for a timber structure. Decking is available in a variety of species, thicknesses, and lengths. Also available are solid and laminated versions of many decking species.
I found it noteworthy, yet not problematic, that this decking only has the tongue and groove on the 96" edges, so the 48" edges should be adequately supported and backed to provide fastening surfaces for adjoining sheets.
Anyway, Tongue And Groove Roof Decking must manage to work alongside the existing home design. This is the reason taking a furniture based on the home concept is more recommended. In selecting furniture, the consideration must be linked to the design and the quality.
Tongue & Groove Pine & Cypress Ceiling Products. When designing a room, amazingly, the ceiling is often overlooked. But, a well-ornamented space is best designed from the top down.