As you begin designing your fabulous new diy outdoor structure it is important to understand the difference between a deck and a patio. Typically, patios are cement or stone living areas constructed at ground level, while decks are raised anywhere from a few inches to stories above the ground.
If you want efficient, environment-friendly, versatile and yet powerful solar lighting for your house's exterior, or a handy and quickly installed lamp for social occasions on your lawn and garden or by the pool, then our 90LED solar lamp is an excellent option.
The annual premiums for a home service contract ranges between $200 – $ 600, for a home under 5,000 sq.ft. When you purchase a plan, you will be provided with a policy booklet that explicitly specifies all the items that will be covered.
The FirePad Deck Protector saves your expensive stone, composite, or wood deck from the heat given off by your fire pit, smoker, or grill. The intense radiant heat flux given off by these products can burn or char an unprotected deck.
Stain is more budget-friendly. Stain runs between $20 and $35 per gallon, while exterior paint suitable for decking ranges from $30 to as much as $60 per gallon.
Introduction Resin based surfacing systems are another comparatively recent introduction to the British and Irish paving markets. Their development has been made possible by significant advances made in polymer and epoxy resins over the past 25 years.
As a DIYer, do you know the difference between Marine Grade Plywood and the more common Pressure Treated Plywood? Plywood is plywood, right? Wrong. The difference can sink or float your boat. “Wood is good” unless it fails to serve the purpose for which it is intended.. To understand the differences between grades of plywood, and the meaning of the various designations, is to choose …
Another difference between the two groups is the scenario of life after death. Roman Catholics insist that the soul can be taken into the purgatory, other than just plainly being torn between …
Hi Rod. If you wish to keep the existing fitting and just replace the GU10 globes then go for GU10 LED globes. If there are 6 of them you really only need 3 to 5 watts and probably stick with a warm white colour so you avoid the artificial white colour.